FBME INTELLIGENT SUBMERSIBLE BRAINAGE PUMP
FBME series is a portable automatic submersible drainage pump, the operation of which is automated by the built-in intelligent
controller and water level electric probe. The accuracy for starting water level reaches to the millimeter level. Delayed shutdown
at low water level will prevent frequent startup due to water level fluctuation. In case of abnormal voltage or overload, the pump
will stop working automatically and detect automatically when start up. It is suitable for use in the places with unstable water level
and voltage, and can be put in operation unattended.
FBME pump adopts lightweight design. The small outer diameter allows it to be used in an 8-inch well. The components of FBME
series are made of wear-resistant rubber and ductile iron which is with excellent durability. The water is sucked from the bottom
and discharged from the top through the inner layer between the motor case and the water jacket, which provides the highest
cooling efficiency for the motor and allows continuous operation at low water level. A large gap is between the semi open impeller
and the pump body, so the impeller will not easily be stuck by mud or sand. The hose coupling could be installed vertically or
obliquely to prevent the soft hose pipe from folding or bending.
Built-in intelligent controller functions:
• When the water level is lower than the liquid level probe, the pump stops working within 60 seconds. When the water level rises
to reach the liquid level probe, the pump starts working again, and the height of the liquid level probe can be adjusted freely.
• When the voltage is abnormal or overloaded, the pump will automatically stop working and recover after 5 minutes. When the
impeller is stuck and locked, the pump will stop working immediately and the pump can be recovered through disconnecting
and then connecting to the power supply.
• When the motor is over temperature, the pump will stop working automatically, and the pump will start up automatically after
the motor is cooled.
• You can query the cumulative operation time of the pump and the latest 5 fault records by checking the display panel.
Application
Civil engineering, construction sites, basements or other utility
pits, rainwater and mud water
Specification
• Water temperature: up to 40°C
• PH: 6.5 to 8.5
• Power supply: single phase 220V ± 10%, 50Hz, 60Hz
• Insulation class: F
• Protection class: IP68
• Cable length: 8m
• Max water depth: 10m
FBME Series
FBME Series
FBME Series
