FCM SUBMERSIBLE DRAINAGE PUMP
FCM series pump is a portable submersible residue drainage pump. There is a one-way valve in the bottom inlet to
prevent the water in the pipeline from flowing back. The minimum water level can be pumped to 1mm.
FCM pump adopts lightweight design. The small outer diameter allows it to be used in an 8-inch well. The components
of FCM series are made of wear-resistant rubber and ductile iron, which is with excellent durability. The water is sucked
from the bottom and discharged from the top through the inner layer between the motor case and the water jacket,
which provides the highest cooling efficiency for the motor and allows continuous operation at low water level. A large
gap is between the semi open impeller and the pump body, so the impeller will not easily be stuck by mud or sand.
The hose coupling could be installed vertically or obliquely to prevent the soft hose pipe from folding or bending.
Application
Civil engineering, building sites, basements or other utility
Pits, rainwater and mud water
Specification
• Water temperature: up to 40°C
• PH: 6.5 to 8.5
• Power supply: single phase 220V ± 10%, 50Hz, 60Hz
• Insulation class: F
• Protection class: IP68
• Cable length: 8m
• Max water depth: 10m
Special features on request
• Other voltages
