KBV SUBMERSIBLE BRAINAGE PUMP
KBV series pump is a portable light drainage pump, used for pumping liquid in ordinary buildings and foundation works.
The structural parts of KBV pump are made of light materials such as aluminum alloy, rubber, etc, which are suitable for
handling on the construction site. The small outer diameter of the pump allows it to be used in a narrow space.
The water is sucked from the bottom of the pump and discharged from the top through side wall channel of the motor,
which provides high cooling efficiency for the motor and allows the pump work normally even if the motor is exposed to
the water. High chrome cast iron impeller and rubber pump body are super wear-resistant. There is a large gap between
the semi open impeller and the pump body, so the impeller will not be easily stuck by mud or sand. The hose coupling
could be installed vertically or obliquely to prevent the soft hose pipe from folding or bending.
Specification
• Capacity: up to 54 m3/h
• Head: up to 37 meters
• Power: Single phase 1.5kW(2HP)
Three phase 1.5kW (2HP) to 5.5kW (7.5HP)
• Power supply: single phase 220V ± 10%, 50Hz, 60Hz
three phase 400V ± 10%, 50Hz
380V ±10%, 60Hz
• Insulation class: F
• Protection class: IP68
• Cable length: 8m
• Water temperature: up to 40°C
• PH: 6.5 to 8.5
• Max.water depth: 25m
Application
• Civil engineering
• Building sites
• Basements or other utility pits
• Rainwater and mud water
Special features on request
• Other voltages
• The length of cable is optional
