KBVE Series

INTELLIGENT SUBMERSIBLE DRAINAGE PUMP KBVE

KBVE series pump is a portable light drainage pump, used for pumping liquid in ordinary buildings and foundation works.
The structural parts of KBVE pump are made of light materials such as aluminum alloy, rubber, etc, which are suitable for
handling on the construction site. The small outer diameter of the pump allows it to be used in a narrow space.
The water is sucked from the bottom of the pump and discharged from the top through side wall channel of the motor,
which provides high cooling efficiency for the motor and allows the pump work normally even if the motor is exposed to
the water. High chrome cast iron impeller and rubber pump body are super wear-resistant. There is a large gap between
the semi open impeller and the pump body, so the impeller will not be easily stuck by mud or sand. The hose coupling
could be installed vertically or obliquely to prevent the soft hose pipe from folding or bending.
The pump can operate automatically with built-in intelligent control system,thus achieve low total energy costs.

Main advantages

• Protcet against reverse phase.ensuring correct impeller rotation(only three phase)

• Automatically stop the pump in event of overload,abnormal voltage and recovery
5min later

• The pump stops working at high temperature.and will automatically restart after
cooling to the specified temperature

• The water sensor's height is adjustable to control pump operation and stop

• The pump stops working within 60s when water level is below the probe.When the
water level rises to contact the electric probe, pump starts operating again

• Rapid assessment about the pump operation and malfunction history(only three phase)

Specification

• Capacity: up to 54 m3/h

• Head: up to 37 meters

• Power: Single phase 1.5kW(2HP)

Three phase 1.5kW (2HP) to 5.5kW (7.5HP)

• Power supply: Single phase 220V ± 10%, 50Hz, 60Hz

Three phase 400V ± 10%, 50Hz
380V ±10%, 60Hz

• Insulation class: F

• Protection class: IP68

• Cable length: 8m

• Water temperature: up to 40°C

• PH: 6.5 to 8.5

• Max.water depth: 25m

Application

• Civil engineering

• Building sites

• Basements or other utility pits

• Rainwater and mud water

Special features on request

• Other voltages

• The length of cable is optional

KBVE Series

KBVE Series

KBVE Series


Drainage submersible pump Neptuni KBVME21.5
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 15
Очень мало
0.00грн.
Drainage submersible pump Neptuni KBVME31.5
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 15
Очень мало
0.00грн.
Drainage submersible pump Neptuni KBVE21.5
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 15
Очень мало
0.00грн.
Drainage submersible pump Neptuni KBVE31.5
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 15
Очень мало
0.00грн.
Drainage submersible pump Neptuni KBVE22.2
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 20
Очень мало
0.00грн.
Drainage submersible pump Neptuni KBVE32.2
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 20
Очень мало
0.00грн.
Drainage submersible pump Neptuni KBVE23.7H
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 30
Очень мало
0.00грн.
Drainage submersible pump Neptuni KBVE33.7
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 21
Очень мало
0.00грн.
Drainage submersible pump Neptuni KBVE43.7
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 21
Очень мало
0.00грн.
Drainage submersible pump Neptuni KBVE35.5
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 25
Очень мало
0.00грн.
Drainage submersible pump Neptuni KBVE45.5
Width of fixed part L4, mm: 8.5 pump type: дренажний selection by head in m: 25
Очень мало
0.00грн.
Showing 1 to 11 of 11 (1 Pages)
Модули для Opencart