pump calpeda NC32-40/180
pump calpeda NC32-40/180
pump calpeda NC32-40/180
pump calpeda NC32-40/180 | |
Head: | 2.25m |
Flow : | 2m3/h |
Pump power: | 0.53kw |
Pump type : | circulation |
Voltage : | 220V |
Pump material : | cast iron |
Impeller material : | composite |
Impeller type : | centrifugal |
Pump location : | any |
Type of connection : | thread |
Spigot diameter : | 2x2inch |
calpeda NC circulation pump 32-40/180 High Energy Efficiency
Performance
High energy efficiency variable speed circulating pump driven by inverter controlled permanent magnet synchronous motor.
Apply
small domestic heating systems
Floor heating
Technical data
- fluid temperature from +2°C to +95°C
- maximum air temperature: from 0°C to +40°C
- max pressure: 6 bar
- Storage conditions: -20°C to +70°C, 95% relative humidity at +40°C
-margining : according to EU marking requirements
- Sound pressure: no more than 43 dB(A)
- Minimum suction pressure: 0.3 bar at 50°C 1.0 bar at 95°C
- Max Glycol: 40%
- Electromagnetic compatibility according to EN 55014-1, EN 61000-3-2, EN 55014-2
- Threaded nozzles according to ISO 228:G 1, G 1 1/2, G 2
- The standard for the most efficient circulators is IEE ≤ 0.20
-minimum-width: 3 W
Engine
Permanent magnet synchronous motor
Engine RPM: Variable Speed
Mains voltage: 230V mono phase (-10%: +6%)
Frequency: 50/60Hz
Protection class: IP 44
Insulation class: H
Class II device
Overload protection (locked rotor):
1) Auto-protect with e-mail
rotor unlock
2) Protected with a heat shield
Cable: working phase e neutral phase wire
Compliance with standards: EN 60335-1, EN 60335-2-51
Custom designs upon request
Brass or cast iron threaded connections
Heat insulation with EPP insulation shell
pump type
innings
pressure
pump power
voltage
pump material
wheel material
pump location
connection type
wheel type
Dimensions and weight
There are no reviews for this product.