Pump Calpeda B-NMP 65/16C/B
Pump Calpeda B-NMP 65/16C/B
Pump Calpeda B-NMP 65/16C/B
| pump calpeda B-NMP65/16C/A | |
| Head : | 25 m |
| Flow rate: | 75 m3/h |
| Pump power: | 9.2 kW |
| Pump type : | Self-priming centrifugal pump with pre-filter |
| Voltage : | 380 V |
| Pump material : | bronze |
| Wheel material : | bronze |
| Wheel type : | centrifugal |
| Pump location : | horizontal |
| Type of connection : | thread |
| Connection diameter : | 3x3 inch |
NMP self-priming pumps are monobloc centrifugal pumps with built-in pre- m filter.
Using NMP pumps.
For pumping water in pool filtration systems.
For clean or slightly contaminated water with suspended solids.
Operating limits for NMP pumps.
Liquid temperature no more than 60°C.
The ambient temperature is not more than 40°C.
Suction height no more than 7 m.
Maximum allowable final pressure in the pump casing: 6 bar.
Electric motor for Calpeda NMP pumps.
Asynchronous two-pole electric motor, frequency 50 Hz (rpm n = 2900 rpm).
< span style="font-family: Tahoma, Arial, Verdana, Helvetica, sans-serif; font-size: 14px;">NMP: three-phase up to 3 kW - 230/400 V (10%), from 4 to 11 kW - 400/690 V (10%).
NMPM: single-phase 230 . (10%) with thermal protector"F"insulation class.
IP 54 Protective Device.
Designed according to IEC 60034.
Special designs for NMP pumps.
To work with other voltages.
to work at 60Hz.
With IP 55 guard.
Special mechanical seals.
For fluid or elevated temperature environments.
We have mechanical seal in stock for calpeda B-NMP65/16C/A
pump type
innings
pressure
pump power
voltage
pump material
wheel material
pump location
connection type
wheel type
Dimensions and weight
There are no reviews for this product.