Head: 1-48m
Flow: 1-230m³/h
Material: PVDF
Voltage: 380V

MCP-125-30-2-V-H-SSIC-5-BT
1 2 3 4 5 6 7 8 9
1-Model No.：MCP，MCPG
2-Caliber：125:5"
3-Horsepower：15:15HP，20:20HP，25:25HP，30:30HP
4-Number of poles：2:2P，4:4P
5-Rubber material：V-VITON，T-Special Fluorine
6-Head：L-Low head ，H-High head
7-Material of shaft seal：SSIC
8-Frequency：5-50Hz，6-60Hz
9-Motor explosion-proof level：CT4-ExdIICT4，BT4-ExdIIBT4

Chemical centrifugal horizontal pump with Vortex impeller (PVDF): powerful, durable, free passage For industrial pumping of aggressive and contaminated liquids, where inclusions of solid or fibrous particles are possible, the chemical centrifugal pump with an open Vortex impeller is ideal. Made of PVDF (polyvinylidene fluoride), it ensures high chemical resistance and trouble-free operation even under the most difficult conditions. ⚙️ Specifications Pump type: centrifugal, horizontal Impeller: Vortex (open type) — with a large free passage Pump material: PVDF (polyvinylidene fluoride) Maximum pressure: up to 48 m Capacity: up to 230 m³/h Nominal passage diameter: depends on the model (up to 65–100 mm) Power supply: 380 V, three-phase Liquid temperature: up to +95°C Seal type: mechanical What is a Vortex wheel? A Vortex wheel (vortex, retreating from the flow) is an impeller located at a distance from the working chamber. The liquid has virtually no contact with the impeller, rotating due to the vortex flow. Advantages: ⚙️ Large free passage — ideal for liquids with inclusions; Minimal risk of blockages-suitable for contaminated environments; Gentle pumping mode-reduces foaming and cavitation. ✅ Advantages of a PVDF pump with a Vortex wheel Resistant to aggressive environments: acids, alkalis, oxidizers Works with contaminated and viscous liquids Not afraid of mechanical inclusions (sediment, suspensions) Temperature resistance up to +95°C Low maintenance costs and long service life High productivity and pressure-up to 230 m³/h and 48 m, respectively Applications Chemical production Pumping sludge, acids, galvanic waste Wastewater treatment Electroplating and etching Pharmaceutical and food industries (if necessary) Agricultural industry (fertilizers, liquid mixtures) Why choose a pump with a Vortex wheel? If your environment contains: solid inclusions, viscous liquids, a tendency to foaming or increased requirements for chemical resistance, then a pump with a PVDF Vortex wheel is the best choice. It combines resistance to aggressive chemicals and reliability of operation with contaminated liquid, ensuring an uninterrupted work process and reducing the failure rate of the system. Pump selection and consultation Our team will help you select a model for your parameters and technological process.