Ваша скидка: -10%
Model:
66D20020000Brand:
Calpeda
Очень много
24,510.56грн.22,059.51грн.
pump type
для бассейнов с фильтромflow selection m3/h
9selection by head in m
10.9| pump calpeda MPC21/A | |
| Head : | 10.9 m |
| Flow rate: | 9 m3/h |
| Pump power: | 0.55 kW |
| Pump type : | for swimming pools with filter |
| Voltage : | 380 V |
| Pump material : | Thermoplastic |
| Wheel material : | Thermoplastic |
| Wheel type : | centrifugal |
| Pump location : | horizontal |
| Type of connection : | thread |
| Connection diameter : | 2x1 1/2 inch |
Self-priming pool pumps with built-in pre-filter and waterproofed motor.< /span>
The pumps are made of the highest quality plastic materials with high resistance to sand and corrosion erosion.
Stainless chrome nickel steel diffuser.
Using MPC pumps.
MPC pumps are used to pump water in pool filtration plants,
for clean or slightly polluted water with suspended solids.
MPC pump operating limits.
Liquid temperature is no more than 60°C.
The ambient air temperature is not more than 40°C.
Maximum allowable final pressure in the pump housing: 2.5 bar.
Continuous operation mode.
Electric motor for Calpeda MPC pumps.
Asynchronous 2-pole motor, frequency 50 Hz (speed n = 2800 rpm)
MPC: three-phase 230/400 V ±10%, MPCM: single-phase 230 V ±10% with thermal protection device max. 1.5 kW.
The capacitor is built into the terminal box.
Isolate class"F".
IP X4 Protector.
Designed according to EN 60 335-2-41 (CEI 61-69).
We have mechanical seal in stock for calpeda MPC21/A
Pump Calpeda MPC 21/A
Pump Calpeda MPC 21/A
Pump Calpeda MPC 21/A
pump type
pump type
для бассейнов с фильтром
innings
flow selection m3/h
9
pressure
selection by head in m
10.9
pump power
pump power, kWt
0.55
voltage
voltage, V
380
pump material
pump material
Термопластик
wheel material
wheel material
Термопластик
pump location
pump location
горизонтальное
connection type
connection type
резьба
wheel type
wheel type
центробежное
Dimensions and weight
Reviews: 0
There are no reviews for this product.