Design
Self-priming monoblock centrifugal pump with built-in ejector.
Application
Water supply from wells.
For lifting water containing air or other gases.
To increase the pressure of water supplied to the pump
by gravity when operating under hydraulic pressure.
To increase the pressure of water from the distribution network (observe local regulations).
For clean water or lightly soiled surfaces.
Use in garden areas.
For washing with a strong water jet.
Operating restrictions
Liquid temperature from 0 to +35 °C.
The ambient temperature is less than 40 °C.
Final pressure in the pump housing: 8 bar.
Continuous operation.
electric motor
Induction motor, 2-pole, 50 Hz, 2800 rpm.
NGL: Three-phase 230/400V ±10%
NGLM: Single-phase 230V ±10% with thermal protector.
The capacitor is built into the terminal box. CEI 61–69).
Special executions on request
other voltages
frequency 60 Hz (see catalog for frequency 60 Hz)
with protection device IP 55
Component | NGL |
Pump housing | Cast iron GJL 200 EN 1561 |
case cover | |
Working wheel | Brass P-Cu Zn 40 Pb 2 UNI 5705 |
Sealing ring between impeller and diffuser | Chrome nickel steel 1.4301 EN 10088 (AISI 304) |
Diffuser | PPO-GF20 (Noril) |
Ejector | PPO-GF20 (Noril) |
Shaft | |
Fur. seal | Charcoal-ceramic-NBR |
download the entire calpeda catalog
download NGL manual download NGL spare parts
Specifications:
n = 2800 rpm
|
Showing 1 to 6 of 6 (1 Pages)