Design
Self-priming monobloc centrifugal pumps with built-in pre-filter Bronze pumps are supplied fully painted.
Application
For pumping water in filtration systems of swimming pools. For clean or slightly polluted water with suspended solids.
Operating restrictions
Fluid temperature less than 60°C.
The ambient temperature is less than 40°С.
Manometric suction height is not more than 7 m
. Final pressure in the pump housing: 6 bar. NMP: three-phase up to 3 kW - 230/400 V (10%);
from 4 to 11 kW - 400/690 V (10%).
IMMPM: Mono-phase 230 V (10%) with thermal protector
Special executions on request
other voltages frequency 60 Hz (see catalog for frequency 60 Hz)
with protective device IP 55
special mech. seals for higher or lower temperature media
Component | Material |
Pump housing diffuser cover Working wheel | Thermoplastic, glass fiber reinforced PPO-GF30, Noryl |
filter cover | Clear polycarbonate, lexan |
drum filter | Polypropylene |
Diffuser funnel and O-ring on the impeller | Stainless chromium-nickel steel AISI 316 |
Mechanical seal | Alumina ceramic, carbon, viton |
download the entire calpeda catalog download the MPC catalog
download MPC manual download MPC parts
Specifications:
n = 2800 rpm
|
Showing 1 to 14 of 14 (1 Pages)