Monoblock multistage horizontal pumps MXH 32. 48

Construction

Monoblock horizontal multistage pumps made of chromium-nickel steel.
Compact and robust design, without protruding flanges and with a one-piece connection between pump and motor with support feet.
The pump body is monolithic, open only on one side (drum type), the front suction bell is located above the pump shaft and the radial supply bell is at the top.
Fill and drain plugs on the center line, accessible from either side (like a clamp box).

Application

Water supply.
Pumping of clean liquids that do not contain abrasive impurities and are not aggressive to stainless steel (pumps with seals made of special materials are available upon request).
Universal pump, used in everyday life, in industry, in gardens and for irrigation.

Operating restrictions

Liquid temperature from -15°C to +110°C. 
Ambient temperature no more than 40°C.
Maximum permissible final pressure in the pump housing: 8 bar.

Electric motor

Induction motor 2-pole, 50 Hz, 2900 rpm.
MHN: three-phase up to 3 kW - 230/400 V (±10%); from 3.7 to 4 kW - 400/690 V (±10%). 
MXHM: monophase 230 V (±10%), with thermal protection device The capacitor is built into the terminal box.
Class "F" insulation.
Protective device IP 54.
Design in accordance with standards:
IEC 60034;
IEC 60038;
IEC 60335-1,
EN 60335-1;
IEC 60335-2-41,
EN 60335-2-41;

Special versions upon request

- other voltages
- frequency 60 Hz (see catalog for frequency 60 Hz)
- with protective device IP 55 - special mech. seals
- Viton O-rings
- for higher or lower temperature environments.

  Specifications:

n = 2900 rpm