Designed for pumping wastewater from buildings and sites in private, commercial and industrial areas in accordance with the European standard EN 12050-1.
TECHNICAL CHARACTERISTICS
- Operating range: flow from 1 to 16 m3/h, pressure up to 10.2 m.
- Liquid temperature range: from 0 °C to +35 °C for domestic use.
- Pumped liquid: wastewater from septic tanks.
- Maximum permissible diameter of solid particles in the pumped liquid: FEKA 600 25 mm
- Minimum dehumidification level: FEKA 600 A 175 mm
FEKA 600 NA 38 mm - Maximum immersion depth: ;7 m.
- Max. operating time without water: 1 min.
- Protection degree: IP 68.
- Insulation class: F
DESIGN FEATURES
Pump body, impeller and suction cover – technopolymer. Motor housing, shaft and screws – stainless steel. A triple gland seal in the oil chamber protects the electric motor from the pumped liquid. The pumps are equipped with a water-cooled asynchronous electric motor and continuous operation (S1). The stator windings are located in a stainless steel motor housing. The rotor rotates on oversized bearings filled with grease for life. The version with a single-phase electric motor has built-in overload protection. To protect the three-phase motor, overload protection must be provided in accordance with current regulations.
Supplied with a standard power cable for single-phase models:
5 meter HO5RN-F cable for: FEKA 600 MA
Cable HO7RN-F 10 meters long for: FEKA 600 M-NA
Standard cable for three-phase models: 5 meters of HO7RN-F cable. The plug standard for single-phase models is SCHUKO EEC VII.
