Pump Calpeda MXA 403/A

Design pump calpeda MXA403/A.
Monoblock horizontal self-primer multistage pump.
The pump body is monolithic, made of stainless chromium-nickel steel, open only on one side (drum type), the front suction bell is located above the pump shaft and the radial supply bell is at the top.
The steps are made of noryl.

MXA Pump Applications.
MXA water pumps are designed for domestic use,
for gardening and watering.

MXA pump operating limits.
Liquid temperature from 0°C to +35°C.
The ambient air temperature is not more than 40°C.
Suction up to 8m
Maximum allowable final pressure in the pump casing: 8 bar.
Continuous mode.

Electric motor for Calpeda MXA pumps.
Asynchronous 2-pole electric motor, frequency 50 Hz (2800 rpm).
MXA: 3-phase 230/400V ±10%, MXAM: single-phase 230V ±10% with thermal protector.
The condenser is built into the terminal box.
Isolate class "F".
IP 54 Protective Device.
Designed according to EN 60335-2-41 (CEI 61-69).

mechanical seal for calpeda MXA403/A pump is in stock

Pump Calpeda MXA 403/A

Pump Calpeda MXA 403/A

Pump Calpeda MXA 403/A