Ваша скидка: -10%
Model:
72A50020000Brand:
Calpeda
Очень много
12,684.07грн.11,415.66грн.
pump type
самовсасывающий до 9мflow selection m3/h
2selection by head in m
20.5calpeda NGX2 pump | |
Head : | 20.5 m |
Flow rate: | 2 m3/h |
Pump power: | 0.45 kW |
Pump type : | self-priming up to 9m |
Voltage : | 380V |
Pump material : | AISI304 |
Wheel material : | brass |
Wheel type : | centrifugal |
Pump location : | horizontal |
Type of connection : | thread |
Connection diameter : | 1x1 inch |
Self-priming monobloc centrifugal pump with built-in ejector.
High quality and environmentally friendly water supply pump. Main pump components: stainless steel body, brass impeller.
Minimum use of plastic materials.
Application:
Well water supply.
For lifting water containing air or other gases.
To increase the pressure of water flowing to the pump by gravity when operating under hydraulic pressure.
To pressurize water from the distribution network (observe local standards).
For clear water or lightly polluted surface water. Garden use.
For washing with a strong water jet.
Operational limits:
Liquid temperature from 0 °C to +35 °C.
The ambient air temperature is not more than 40 °C.
Maximum allowable final pressure in the pump casing: 8 bar.
Continuous mode.
Design:
Electric Motor:
Asynchronous 2-pole motor, 50 Hz (2800 rpm).
NGX: three-phase 230/400V ±10%.
NGXM: single phase 230.±10% with thermal protector.
The capacitor is built into the terminal box.
Isolate class"F".
IP 54 safety device.
We have mechanical seal in stock for calpeda NGX2
Pump Calpeda NGX 2
Pump Calpeda NGX 2
Pump Calpeda NGX 2
pump type
pump type
самовсасывающий до 9м
innings
flow selection m3/h
2
pressure
selection by head in m
20.5
pump power
pump power, kWt
0.45
voltage
voltage, V
380
pump material
pump material
AISI304
wheel material
wheel material
латунь
pump location
pump location
горизонтальное
connection type
connection type
резьба
wheel type
wheel type
центробежное
Dimensions and weight
Reviews: 0
There are no reviews for this product.