The EPS S “Comfort” foam brand is characterized by low density, which determines the area of its application: indoor areas that are not exposed to aggressive external influences and strong mechanical loads. Nevertheless, this type of foam plastic has proven to be excellent for filling voids, soundproofing and insulating change houses and other temporary structures.
PHYSICAL AND MECHANICAL PROPERTIES OF EPS S FOAM »
Parameter
Compressive strength at 10% deformation, MPa, not less than 0.05
Bending strength limit, MPa, not less than 0.07
Dry thermal conductivity at 25+5ºС, W/m.K. 0.042
Moisture resistance of boards, % no more 12
Water absorption in 24 hours, % by volume, no more 3.0
Boundary deviations from the minimum dimensions of slabs, mm
by length 5
by width 5
by thickness ine 2
USE:
between masonry;
facing the premises from the inside;
insulation of interior structures;
insulation of places through which cold enters the room: eaves joints, doorways, roofs, floors;Laying of temporary structures.
Foam EPS S "Comfort"
Foam EPS S "Comfort"
Foam EPS S "Comfort"
