Pumps bagatoryadn_ verikalnі nі nі nі nіnіnі stаіnpіnі chastі Calpeda MXV
Construction
Bagatoryadni vertical piping parts of the pump with smoky and feeding pipes, which can be made with the same diameter and stowing on the very same shaft (pikonanniy).
The guide bushings are resistant to corrosion and are covered with a motherland that can be pumped over.
The pump is equipped with a thrust bearing and mounted with a bushing for the possibility of using any standard motor of the V1 construction model.
Zastosuvannya
Water supply.
For pumping clean, non-explosive liquids that do not contain abrasive solids or fibrous impurities and are not aggressive to stainless steel (on request, a seal made of a special material is installed).
Universal pump for use in domestic and industrial applications, pressure boosting systems, fire fighting systems, high pressure washers, irrigation, agriculture, sports facilities.
Operating restrictions
Liquid temperature from -15°С to +110°С.
The ambient temperature is not more than 40°С.
Maximum allowable final pressure in the pump casing: 25 bar. electric motor
electric motor
Standard asynchronous electric motor, frequency 50 Hz.
Energy efficiency class EFF2 (EFF1 with increased efficiency on request).
Structural model IM V1 (EC 60034-7).
Insulation class "F" (EC 60085), protective device IP 55 (EC 60529), three-phase,
rated voltage (EC 60038): up to 3 kW - 230/400 V;
from 4 kW - 400/690 V.
Rated speed (50 Hz): MXV = 2900 rpm,
MXV4 = 1450 rpm. MXV 25-2, 32-4, 40-8 MXV 50-16, 65-32, 80-48
| Component | MXV25-2, MXV32-4, MXV40-8 | MXV50-16, MXV65-32, MXV80-48 | MXVL |
| Suction body Delivery body Flange | Chrome nickel steel 1.4301 EN 10088 (AISI 304) | Cast iron GJL 250 EN 1561 | steel Cr-Ni-Mo1.4401 EN 10088 (AISI 316) |
| Outer casing Cascade casing Impeller Bottom cover Top cover Spacer sleeve | Chrome nickel steel 1.4301 EN 10088 (AISI 304) | ||
| Pump Shaft Plug | Chrome nickel steel 1.4305 EN 10088 (AISI 303) | steel Cr-Ni-Mo1.4401 EN 10088 (AISI 316) | |
| Shaft | Chrome nickel steel 1.4305 EN 10088 (AISI 303) | steel Cr-Ni-Mo1.4401 EN 10088 (AISI 316) | |
| Bearing sleeve/ Bearing in cascade housing | Anti-corrosion carbide - stainless/ceramic | Anti-corrosion carbide - stainless/ceramic | |
| Fur. seal according to ISO 3069 | hard metal - carbon - EPDM | hard metal - carbon - EPDM | |
| Sealing ring on the impeller | PTFE (Teflon) | PTFE (Teflon) | |
| O-ring | NBR | NBR | |
download the entire calpeda catalog download the MXV, MXV-L catalog
download manual MXV, MXV-L download spare parts MXV, MXV-L
Specifications
Specifications
n = 2900 rpm
|
