Bestseller. It has optimal thermal and mechanical properties, as a result of which it has a wide range of applications: it is used both inside and outside for work related to insulation and sound insulation.
PHYSICAL AND MECHANICAL PROPERTIES OF FOAM PLASTIC EPS 100 "GOST"
Compressive strength at 10% deformation, MPa, not less than 0,10
Bending strength limit, MPa, not less 0.18
Dry thermal conductivity at 25+5ºС, W/m .К. 0.039
Moisture resistance of plates, % no more 12
Water absorption in 24 hours, % by volume, no more 2.0
Boundary deviations from the minimum dimensions slabs, mm
by length 5
by width 5
by thickness 2
APPLICATION:
External wall insulation with light wet and dry methods;
p>
as a filler in the walls of frame houses, as well as for the insulation of such houses from the outside;
between bricklaying;
insulation of balconies and loggias;
to create a smooth surface of the walls from the inside (under plaster);
for the insulation of ceilings with a light wet method and inter-rafter insulation of roofs;
facing and insulation of auxiliary unheated premises, outbuildings, garages, kiosks, construction wagons;
insulation of places through which cold enters the room: eaves joints, doorways, floors.
Polyfoam EPS 100 "GOST"
Polyfoam EPS 100 "GOST"
Polyfoam EPS 100 "GOST"
