Design
Submersible multistage pumps made of stainless
chromium-nickel steel
Hydraulics at the bottom and motor at the top, cooled by the
pumped water to ensure reliable operation even
when the pump is partially submerged.
Double seal on the shaft with inserted oil chamber.
The suction filter prevents
solids larger than:
- 2.5 mm for MXS 203,204,205,206,404,405,803,804
- 2 mm for MXS 207,8,9,10 - 406,7,8,9,10 - 805,6,7,8, nine.
Application
Water supply from wells, baths or reservoirs. Use in everyday life, industry, gardening and irrigation. Rain water recycling.
Operating restrictions
Maximum fluid temperature: 35°C.
Minimum inside diameter of the well: 132 mm.
Immersion depth: min. 100 mm, max. 20 m (with appropriate cable length).
electric motor
Induction motor, 2-pole, 50 Hz, 2900 rpm.
MXS: three-phase 230V (10%); three-phase 400 V (10%).
MXSM : 230 V mono phase (10%)
with thermal protector up to 1.1 kV.
Capacitor in control box (thermal for 1.5 kV)
Pump with float switch (on request)
Cable: length 15 m, 4G1 mm2, type H07RN8-F.
Class "F" insulation.
IP 68 protection (for continuous submerged operation).
The winding is dry with double impregnation resistant to moisture.
Execution in accordance with EN 60335-2-41 (CEI 61-69)
| Component | MXS |
| Feeding housing parts* | Chrome nickel steel 1.4301 EN 10088 (AISI 304) Brass UNI-EN 12165-98** |
| Outer casing - Suction filter Stage housing - Impeller Oil cover chambers Spacer - Motor housing | Chrome nickel steel 1.4301 EN 10088 (AISI 304) |
| Shaft | Chrome nickel steel 1.4305 EN 10088 (AISI 303) Chrome nickel steel 1.4301 EN 10088 (AISI 304)** |
| Engine cover | Brass P-Cu Zn 40 Pb 2 UNI 5705 |
| Top, mechanical seal | Steatite, coal, NBR |
| Lower mechanical seal | Alumina ceramic, Silicon carbide, NBR Silicon carbide, Silicon carbide, NBFT* |
| Seal lubricant | White oil for food and medical use |
download the entire calpeda catalog download the MXS catalog
download MXS manual download MXS spare parts
Specifications:
n = 2850 rpm
|