Model:
70A40031000Brand:
Calpeda
Очень много
15,160.60грн.
pump type
самовсасывающий до 8мflow selection m3/h
2selection by head in m
32| pump calpeda NG3/A | ||
| Head : | 32m | |
| Delivery: | 2m3/h | |
| Pump power: | 0.55kw | |
| Pump type : | self-priming up to 8m | |
| Voltage : | 380V | |
| Pump material : | cast iron | |
| Impeller material : | brass | |
| Impeller type : | centrifugal | |
| Pump location : | horizontal | |
| Type of connection : | thread | |
| Spigot diameter : | 1x1inch | |
Self-priming monobloc centrifugal pumps with built-in ejector.
Using NG pumps.
NG Pumps used for water supply from wells,
for clean liquids or slightly contaminated surface water, to increase pressure,
sourced from a distribution network (subject to local standards),
for horticultural use, for pressure washing.
Operating limits for NG pumps.
Liquid temperature no more than 40°C.
The ambient air temperature is not more than 40°C.
Maximum allowable final pressure in the pump housing: 10 bar.
Continuous operation.
Electric motor for Calpeda NG pumps.
Asynchronous two-pole electric motor, frequency 50 Hz (speed n = 2900 rpm).
NG: three-phase - 230/400V (±10%).
NGM: single-phase 230 V (±10%), with thermal protector.
Condenser built into clamp box.
Isolate class "F".
IP 54 Protective Device.
Designed according to EN 60335-2-41 (CEI 61-69).
Custom designs for NG pumps.
For other voltages.
To work at 60Hz.
With IP 55 protection device.
Special mechanical seals.
mechanical seal for calpeda NG3/A pump is in stock
Pump Calpeda NG 3/A
Pump Calpeda NG 3/A
pump type
pump type
самовсасывающий до 8м
innings
flow selection m3/h
2
pressure
selection by head in m
32
pump power
pump power, kWt
0.55
voltage
voltage, V
380
pump material
pump material
чугун
wheel material
wheel material
латунь
pump location
pump location
горизонтальное
connection type
connection type
резьба
wheel type
wheel type
центробежное
Dimensions and weight
Reviews: 0
There are no reviews for this product.