Model:
70B00091000Brand:
Calpeda
Очень много
21,834.80грн.
pump type
самовсасывающий до 8мflow selection m3/h
3selection by head in m
38| calpeda NGM32E pump | |
| Head : | 38m |
| Flow : | 3m3/h |
| Pump power: | 1.1kw |
| Pump type : | self-priming up to 8m |
| Voltage : | 220V |
| Pump material : | cast iron |
| Impeller material : | brass |
| Impeller type : | centrifugal |
| Pump location : | horizontal |
| Type of connection : | thread |
| Connection diameter : | 1 1/2x1inch |
Self-priming monobloc centrifugal pumps with built-in ejector.
Using NG pumps.
NG Pumps used for water supply from wells,
for clean liquids or slightly contaminated surface water, to increase pressure,
sourced from a distribution network (subject to local standards),
for horticultural use, for pressure washing.
Operating limits for NG pumps.
Liquid temperature no more than 40°C.
The ambient air temperature is not more than 40°C.
Maximum allowable final pressure in the pump housing: 10 bar.
Continuous operation.
Electric motor for Calpeda NG pumps.
Asynchronous two-pole electric motor, frequency 50 Hz (speed n = 2900 rpm).
NG: three-phase - 230/400V (±10%).
NGM: single-phase 230 V (±10%), with thermal protector.
Condenser built into clamp box.
Isolate class "F".
IP 54 Protective Device.
Designed according to EN 60335-2-41 (CEI 61-69).
Custom designs for NG pumps.
For other voltages.
To work at 60Hz.
With IP 55 protection device.
Special mechanical seals.
mechanical seal for calpeda NGM32E pump is in stock
Pump Calpeda NGM32E
Pump Calpeda NGM32E
pump type
pump type
самовсасывающий до 8м
innings
flow selection m3/h
3
pressure
selection by head in m
38
pump power
pump power, kWt
1.1
voltage
voltage, V
220
pump material
pump material
чугун
wheel material
wheel material
латунь
pump location
pump location
горизонтальное
connection type
connection type
резьба
wheel type
wheel type
центробежное
Dimensions and weight
Reviews: 0
There are no reviews for this product.