Vertical multistage centrifugal pumps of this series are designed for water supply and pressure boosting systems. The presence of the MCE/P inverter provides high operational flexibility, allowing the pump to automatically adapt to different system requirements and maintain a constant pressure in it. These pumps are recommended for use in pressure boosting stations, drip and sprinkler irrigation systems, high-pressure washers.
TECHNICAL CHARACTERISTICS
- Protection degree: IP 55.
- Insulation class: F.
- Supply voltage: 1 x 220-240 V/50/60 Hz;
3 x 400 V/50 Hz. - Operating range: flow from 1.8 to 13.5 m3/h, pressure up to 139 m.
- Liquid temperature range: ;from 0 to +35 °C when operating the pump in a domestic water supply system;
from-15 to 110 °C for other pump applications. - Pumped liquid: clean, free of solid and abrasive inclusions, non-viscous, non-aggressive, non-crystallized, chemically neutral.
- Maximum ambient temperature: +40 °C.
- Maximum operating pressure: 18 Bar (1,800 kPa).
- Installation: vertically, in a fixed position.
DESIGN FEATURES
Casing of the pressure and suction chambers – cast iron with anti-corrosion coating. Impellers, diffusers and diffuser covers – technopolymer. Hydraulic housing, hydraulic shaft and wear rings – stainless steel steel. The bearing of the centering diffuser is made of bronze and is lubricated by the pumped liquid. Mechanical seal – graphite/ceramic. The engine and hydraulic shafts are connected by a rigid coupling. The pumps are equipped with an air-cooled asynchronous electric motor. The delivery set includes threaded counter flanges.
